Mineral Processing - Magnetic/Conductive Ore
SCI-TRONICS Metal Detection
MODEL TYPES
SCI-TRONICS - Tramp Metal Detection Systems
Models 1080 Dual Coil and Single Coil 
Single Coil Model
This model is designed to scan products from underneath
the conveyor or slider bed and is recommended for applications where space
prohibits mounting an overhead coil. Coil can be contoured for troughed
conveyors. Coil is highly sensitive, especially near the bottom of the belt.
Sensitivity decreases with the height above the bottom of the belt.
Dual Coil Model
This model is designed to scan products from underneath
the conveyor or slider bed and is recommended for applications where space
prohibits mounting an overhead coil. Coil can be contoured for troughed
conveyors. Coil is highly sensitive, especially near the bottom of the belt.
Sensitivity decreases with the height above the bottom of the belt.
FEAUTURES
SCI-TRONICS - Tramp Metal Detection Systems
Models 1080 Dual Coil and Single Coil
Features of SciTronics Dual & Single Coil Detectors
Wide Application Range
SciTronics detectors are designed to find tramp while
scanning products such as highly mineralized magnetic or conductive ores
(including magnetite and pyrites, even when conveyed on steel cable belts) as
well as copper, nickel, aluminium, aggregates, coal, rubber, wood chips, sinter
and tar sands. They can also be used in recycling plants to detect tramp among
plastic, glass or paper.
The electrical conductivity of materials conveyed through
the SciTronics sensor area is measured by detecting variations in a pulsed
electronic field. Since magnetic and conductive properties of any material are
independent, both magnetic and non-magnetic metals are detected.
Ease of Set Up and Use 
Complete programming, including settings for alarm delay,
alarm duration, sensitivity scale factor and splice detector duration and
threshold, is accomplished by turning dials on the control panel.
Reliable Operation
Solid-state ICs ensure long operating life and
trouble-free service. Circuitry has designed-in automatic spike protection
(ASP). Resident diagnostic monitor uses LEDS to indicate the operational status
of the circuit.
Durability Built
Coil units are made of monolithic, high-impact resistant
PVC to withstand damage by even frost chunks or other types of over-capacity
loads. The rigid framing and other system components are made to stand up under
the harshest conditions. SciTronics detectors are built so well they come with
a 3-year parts and labour warranty protection from manufacturing defects.
Convenient Repair
Relays and circuit modules are field replaceable.
Optional Detector Accessories:
-
Backlit LCD Trip Counter
-
Splice Detector
-
high performance inductance coil
-
Coast Alarm
-
detects tramp after initial alarm and provides tramp market signal during the
belt coast interval
-
Long Bar Detector
-
protects conveyor belt from rip or tear detecting long bar or long rod type
tramp.
-
Flag Drop - Metal Marker
-
Liquid Pneumatic Spray
-
Operated Metal Marker
-
Remote Reset
-
alarm, ready indicator lamps and alarm counter may be installed within the
remote station enclosure
-
Alarm Horn
-
Rotating Alarm Beacon
-
Shift Register
-
NEMA 9, 7 and 4 Control Enclosure
SPECIFIATIONS
SCI-TRONICS - Tramp Metal Detection Systems
Models 1080 Dual Coil and Single Coil
Models 1080 Dual and Single Coil Specifications
|