SCI-TRONICS Metal Detection

Model Types

SCI-TRONICS – Tramp Metal Detection Systems

Models 1080 Dual Coil and Single Coil

Single Coil Model

This model is designed to scan products from underneath the conveyor or slider bed and is recommended for applications where space prohibits mounting an overhead coil. Coil can be contoured for troughed conveyors. Coil is highly sensitive, especially near the bottom of the belt. Sensitivity decreases with the height above the bottom of the belt.

Dual Coil Model

This model is designed to scan products from underneath the conveyor or slider bed and is recommended for applications where space prohibits mounting an overhead coil. Coil can be contoured for troughed conveyors. Coil is highly sensitive, especially near the bottom of the belt. Sensitivity decreases with the height above the bottom of the belt.

Features

SCI-TRONICS – Tramp Metal Detection Systems

Models 1080 Dual Coil and Single Coil

Features of SciTronics Dual & Single Coil Detectors

Wide Application Range

SciTronics detectors are designed to find tramp while scanning products such as highly mineralized magnetic or conductive ores (including magnetite and pyrites, even when conveyed on steel cable belts) as well as copper, nickel, aluminium, aggregates, coal, rubber, wood chips, sinter and tar sands. They can also be used in recycling plants to detect tramp among plastic, glass or paper.

The electrical conductivity of materials conveyed through the SciTronics sensor area is measured by detecting variations in a pulsed electronic field. Since magnetic and conductive properties of any material are independent, both magnetic and non-magnetic metals are detected.

Ease of Set Up and Use

Complete programming, including settings for alarm delay, alarm duration, sensitivity scale factor and splice detector duration and threshold, is accomplished by turning dials on the control panel.

Reliable Operation

Solid-state ICs ensure long operating life and trouble-free service. Circuitry has designed-in automatic spike protection (ASP). Resident diagnostic monitor uses LEDS to indicate the operational status of the circuit.

Durability Built

Coil units are made of monolithic, high-impact resistant PVC to withstand damage by even frost chunks or other types of over-capacity loads. The rigid framing and other system components are made to stand up under the harshest conditions. SciTronics detectors are built so well they come with a 3-year parts and labour warranty protection from manufacturing defects.

Convenient Repair

Relays and circuit modules are field replaceable.

Optional Detector Accessories:

• Backlit LCD Trip Counter
• Splice Detector
• high performance inductance coil
• Coast Alarm
• detects tramp after initial alarm and provides tramp market signal during the belt coast interval
• Long Bar Detector
• protects conveyor belt from rip or tear detecting long bar or long rod type tramp.
• Flag Drop – Metal Marker
• Liquid Pneumatic Spray
• Operated Metal Marker
• Remote Reset
• alarm, ready indicator lamps and alarm counter may be installed within the remote station enclosure
• Alarm Horn
• Rotating Alarm Beacon
• Shift Register
• NEMA 9, 7 and 4 Control Enclosure

Specifications

SCI-TRONICS – Tramp Metal Detection Systems

Models 1080 Dual Coil and Single Coil

Models 1080 Dual and Single Coil Specifications