Self Cleaner Electro Overhead Magnet

• Cleans itself automatically
• Cleans itself completely
• Runs quietly
• Extra thick belt 3 ply
• Cleats are vulcanised
• Discharges clear of conveyor

A thick heavy duty rubber belt moves continuously and quietly around the magnet. This belt intercepts attracted metal and sweeps it off the magnet. There's never a chance for excessive build up of iron - too much iron on the face of a magnet shorting out magnetism. Rubber cleats vulcanised to the belt ensure complete sweeping of all metal. Vulcanising prevents attracted metal from lodging under cleats as is the case with other designs with cleats bolted to a belt. Permanent magnet extensions are available to extend trajectory of discharged metal.

• Four pulleys conserve space
• Pulleys are crowned
• Self aligning bearings
• Interchangeable bearings
• Greaseable bearings

A 4 pulley design is used on nearly all models. This allows a saving in space and weight compared to a 2 pulley design. All pulleys are crowned for reliable belt tracking. Bearings are of course greaseable and self aligning. Besides that, all bearings are interchangeable.

• Continuous duty
• Obsoletes oil tank designs
• No plumbing
• Mounts at any angle
• Support above or below

All models are built for continuous magnet energising and for continuous belt cleaning. Energising is by direct current. Dings can supply rectifiers. Conventional designs need external control of oil expansion and moisture. There are no external oil tanks or plumbing on the Dings design. They aren't needed. That means the Dings design can be mounted at any angle - even upside down. Steel lugs are provided for suspended mounting or underneath mounting.

• Wound with anodised aluminum
• Insulation better than class H
• Convenient terminal box
• Three year coil guarantee

All models are built with aluminum strip (not wire) and not plain aluminum but anodised aluminum. Insulation quality in the coil far exceeds class H. The coil is virtually burnout proof. A 3 year guarantee applies against coil burnout. Coil leads are connected to leak proof terminals inside an easy to get at gasketed terminal box.

Stationary Electro Overhead Magnet

• Economy
• Saves space
• Less weight

Stationary Electro Overhead Magnets are identical to the magnets inside Self Cleaner models. There's no need to invest in a self cleaning system for removal of occasional tramp iron or small quantities of contaminants. Stationary models are cleaned simply by shutting off d-c power. A trolley or small crane can be used to move the magnet to a discharge bin.

• Cable suspension supplied
• Separate suspension members
• Turnbuckle adjustment
• No cable measuring
• No cable cutting

A 3 point cable sling suspension system with bull ring is included. Each of the 3 suspension members is independent of the others. One member includes a turnbuckle for quick and easy one time adjustment of mounting angle. Adjustment can be made while the magnet is hanging in position. There's no measuring, shortening, lengthening or cutting of cable.

• No maintenance
• Silent operation

Stationary models have no moving parts. All steel sides plus the stainless steel bottom are welded together with continuous welds. There's nothing to lubricate, tighten or replace.

• Mounting choice

Stationary models mount over a head pulley or anywhere over the straight section of a conveyor. A head head pulley installation costs less. (see discussion under Self Cleaners)

Oil Cooled Electro Overhead Magnet Construction Data

Stationary (Manual Cleaning) Magnets and Inline and Crossbelt (Self Cleaning) Magnets Manufactured in Australia Under License by Sturton-Gill Engineering PTY Ltd.